Book Details

Design of Machine Elements II

Design of Machine Elements II

Published by uLektz

Course Code:10ME62

Author:uLektz

University: Visvesvaraya Technological University, Karnataka (VTU)

Regulation:2010

Categories:Mechanical

Format : ico_bookePUB3 (DRM Protected)

Type :eBook

Rs.199 Rs.30 Rs.85% off

Preview Buy Now

Description :Design of Machine Elements II of 10ME62 covers the latest syllabus prescribed by Visvesvaraya Technological University, Karnataka (VTU) for regulation 2010. Author: uLektz, Published by uLektz Learning Solutions Private Limited.

Note : No printed book. Only ebook. Access eBook using uLektz apps for Android, iOS and Windows Desktop PC.

Topics
UNIT - 1 CURVED BEAMS AND CYLINDERS & CYLINDER HEADS

1.1 Curved Beams: Stresses In Curved Beams Of Standard Cross Sections Used In Crane Hook, Punching Presses & Clamps, Closed Rings And Links

1.2 Cylinders & Cylinder Heads:Review Of Lame’s Equations; Compound Cylinders, Stresses Due To Different Types Of Fits, Cylinder Heads, Flats

UNIT - 2 BELTS ROPES AND CHAINS

2.1 Belts Ropes And Chains: Flat Belts: Length & Cross Section, Selection Of v-Belts

2.2 Ropes And Chains For Different Applications

UNIT - 3 SPRINGS

3.1 Springs: Types Of Springs

3.2 Stresses In Helical Coil Springs Of Circular And Non-Circular Cross Sections

3.3 Tension And Compression Springs, Springs Under Fluctuating Loads

3.4 Leaf Springs:Stresses In Leaf Springs

3.5 Equalized Stresses, Energy Stored In Springs, Torsion,Belleville And Rubber Springs

UNIT - 4 SPUR & HELICAL GEARS

4.1 Spur & Helical Gears: Spur Gears: Definitions, Stresses In Gear Tooth: Lewis Equation And Form Factor, Design For Strength, Dynamic Load And Wear Load

4.2 Helical Gears: Definitions, Formative Number Of Teeth, Design Based On Strength, Dynamic And Wear Loads

UNIT - 5 BEVEL AND WORM GEARS

5.1 Bevel And Worm Gears: Bevel Gears: Definitions, Formative Number Of Teeth, Design Based On Strength, Dynamic And Wear Loads

5.2 Worm Gears: Definitions, Design Based On Strength, Dynamic, Wear Loads And Efficiency Of Worm Gear Drives

UNIT - 6 CLUTCHES & BRAKES

6.1 Clutches & Brakes: Design Of Clutches: Single Plate, Multi Plate And Cone Clutches

6.2 Design Of Brakes: Block And Band Brakes: Self Locking Of Brakes: Heat Generation In Brakes

UNIT - 7 LUBRICATION AND BEARINGS

7.1 Lubrication And Bearings: Lubricants And Their Properties, Mechanisms Of Lubrication

7.2 Bearing Modulus, Coefficient Of Friction, Minimum Oil Film Thickness

7.3 Heat Generated, Heat Dissipated, Bearing Materials

7.4 Examples Of Journal Bearing And Thrust Bearing Design

UNIT - 8 IC ENGINE PARTS

8.1 IC Engine Parts: Design Of Piston

8.2 Connecting Rod

8.3 Crank Shaft

loading