# Mechanics of Solids

 Course Code : ULZ0047 Author : uLektz University : General for All University Categories : Civil Format : ePUB3 (DRM Protected) Type : eBook

FREE

Description :Mechanics of Solids of ULZ0047 covers the latest syllabus prescribed by General for All University for regulation 1. Author: uLektz, Published by uLektz Learning Solutions Private Limited.

Note : No printed book. Only ebook. Access eBook using uLektz apps for Android, iOS and Windows Desktop PC.

##### Topics
###### UNIT I STRESS AND STRAIN

1.1 Stress and strain at a point

1.2 Tension, Compression, Shear Stress

1.3 Hooke’s Law

1.4 Relationship among elastic constants

1.5 Stress Strain Diagram for Mild Steel, TOR steel, Concrete

1.6 Ultimate Stress

1.7 Yield Stress

1.8 Factor of Safety

1.9 Thermal Stresses

1.10 Thin Cylinders and Shells

1.11 Strain Energy due to Axial Force

1.12 Resilience

1.13 Stresses due to impact and Suddenly Applied Load

1.14 Compound Bars

###### UNIT II SHEAR AND BENDING IN BEAMS

2.1 Beams and Bending

2.3 Type of Supports

2.4 Shear Force(SF) and Bending Moment(BM) Diagrams for statically determinate beam with concentrated load, UDL, uniformly varying load

2.5 Theory of Simple Bending

2.6 Analysis of Beams for Stresses

2.7 Stress Distribution at a cross Section due to bending moment and shear force for Cantilever, simply supported and overhanging beams with different loading conditions

2.8 Flitched Beams

###### UNIT III DEFLECTION

3.1 Double integration method

3.2 Macaulay's methods

3.3 Area moment method

3.4 conjugate beam method for computation of slopes and deflections of determinant beams.

###### UNIT IV TORSION

4.1 Torsion of Circular and Hollow Shafts

4.2 Elastic Theory of Torsion

4.3 Stresses and Deflection in Circular Solid and Hollow Shafts

4.4 Combined bending moment and torsion of shafts

4.5 strain energy due to torsion

4.6 Modulus of Rupture

4.7 Power transmitted to shaft

4.8 Shaft in series and parallel

4.9 Closed and Open Coiled helical springs

4.10 Leaf Springs

4.11 Springs in series and parallel

4.12 Design of buffer springs

###### UNIT V COMPLEX STRESSES AND PLANE TRUSSES

5.1 2 D State of Stress – 2 D Normal and Shear Stresses on any plane

5.2 Principal Stresses and Principal Planes

5.3 Mohr's circle

5.4 Plane trusses: Analysis of plane trusses

5.5 Method of joints

5.6 Method of sections