Book Details

Electronics Engineering

Electronics Engineering

Published by uLektz

Course Code : ULZ0381
Author : uLektz
University : General for All University
Regulation : 2017
Categories : Electronics & Communication
Format : ico_bookePUB3 (DRM Protected)
Type : eBook

FREE

Buy Now

Description :Electronics Engineering of ULZ0381 covers the latest syllabus prescribed by General for All University for regulation 2017. Author: uLektz, Published by uLektz Learning Solutions Private Limited.

Note : No printed book. Only ebook. Access eBook using uLektz apps for Android, iOS and Windows Desktop PC.

Topics
Unit I Semiconductor Diode

1.1 Depletion layer-V-I characteristics-

1.2 Ideal and practical-Diode resistance, capacitance-Diode Equivalent Circuits-Transition and Diffusion Capacitance

1.3 Zener Diodes breakdown mechanism (Zener and avalanche)Series , Parallel and Series, Parallel Diode Configuration

1.4 Half and Full Wave rectification

1.5 Clippers, Clampers

1.6 Zener diode as shunt regulator-Voltage-Multiplier Circuits

1.7 Light-Emitting Diodes

1.8 Varactor (Varicap) Diodes

1.9 Tunnel Diodes

1.10 Liquid-Crystal Displays

Unit II Bipolar Junction Transistor

2.1 Transistor Construction, Operation,Amplification action

2.2 Common Base, Common Emitter, Common Collector Configuration

2.3 Operating Point-Fixed-Bias, Emitter Bias, Voltage-Divider Bias Configuration-Collector Feedback

2.4 Emitter-Follower Configuration-Bias Stabilization

2.5 CE,CB,CC amplifiers and analysis of single stage CE amplifier

2.6 Construction and Characteristic of JFET’s, Transfer Characteristic

2.7 CS,CD,CG amplifier and analysis of CS amplifier

2.8 MOSFET (Depletion and Enhancement)Type,Transfer Characteristic

Unit III Operational Amplifiers

3.1 Introduction

3.2 Differential Amplifier Circuits

3.3 Op-Amp Basic-Practical Op-Amp Circuits (Inverting Amplifier, Non-inverting Amplifier, Unit Follower, Summing Amplifier, Integrator, Differentiator)

3.4 Differential and Common-Mode Operation

Unit IV Digital Voltmeter, Digital Multimeters, Oscilloscope

4.1 Introduction, RAMP Techniques

4.2 Digital Multimeters

4.3 Introduction, Basic Principle

4.4 CRT

4.5 Block Diagram of Oscilloscope, Simple CRO, Measurement of voltage , current phase and frequency using CRO

Unit V Fundamentals of Communication Engineering

5.1 Elements of a Communication System, Need of modulation

5.2 Electromagnetic spectrum and typical applications

5.3 Terminologies in communication systems

5.4 Basics of signal representation and analysis

5.5 Fundamentals of amplitude and angle modulation, Modulation and demodulation techniques

loading